HUAWEI Mate X2 Seawater Damage Repair (I)

HUAWEI Mate X2 Seawater Damage Repair (I)

HUAWEI Mate X2 Seawater Damage Repair

huawei mate x2 seawater damage repair png

Model: HUAWEI Mate X2

Announced: 2021, February 22

Defect Phenomenon

The phone was seawater damaged and then cannot be booted.

The seawater is very corrosive, after the seawater damage if the phone has not been dealt with timely and properly will cause a lot of issues.

Troubleshooting Process

Let’s place the phone on the heating pad to heat and then separate.

huawei mate x2 seawater damage repair put the phone on heating pad to

After heating a while, the glue on the frame became very soft and we can separate the rear cover with a very thin plastic card easily.

huawei mate x2 seawater damage repair separate with thin card

Check the inside situation, the mainboard is covered with solidified sea salt.

huawei mate x2 seawater damage repair full of salt

Let’s protect the cameras with stickers first.

huawei mate x2 seawater damage repair protect with stickers

Take out the motherboard, it’s amazing that there are still so many sea salt particles inside the phone.

huawei mate x2 seawater damage repair sea salt can be found in the phone

Then let’s check the motherboard under the microscope carefully, as guessed, there are many components on the motherboard that are corroded.

huawei mate x2 seawater damage repair the corrosive parts on motherboard

After checking, many capacitors and resistors are missing. Besides this, even a small shielding cover has fallen off, and many areas with green/blue corrosive electrolytes.

Like this kind of serious corrosion, we have to remove all the shielding covers and clean the components inside with the ultrasonic cleaner + PCB cleaner liquid thoroughly.

huawei mate x2 seawater damage repair remove the shielding covers

huawei mate x2 seawater damage repair ultrasonic cleaner to clean the

After cleaning, scratch off the corrosive and blacken pads carefully.

huawei mate x2 seawater damage repair scratch off the corrosive and

The 1st stage of physical cleaning is finished, let’s clean the motherboard with the PCB cleaner + brush again.

Then connect with the DC power supply machine to have a test, after testing, there is a large current leakage.

huawei mate x2 seawater damage repair large current leakage can be

huawei mate x2 seawater damage repair large current leakage

Where there is current leakage, there is a hot component or chip. Let’s inspect the motherboard under the thermal imager, and find the heat is coming from the PCB layers.

huawei mate x2 seawater damage repair find the heat is come from pcb

We can see the corrosive from the side of the PCB board.

huawei mate x2 seawater damage repair the inner rail is broken

For this kind of defect, we can only fix it by scratching off the layers and jumping wires to fix it.

huawei mate x2 seawater damage repair scratch off the layers

There are many layers inside the PCB board, so we need to scratch off layer by layer until reaching the layer that has no short.

huawei mate x2 seawater damage repair scratch off many layers already

The scratching-off layers process requires a lot of patience and carefulness.

Then the next step, we need to jump wires.

How to Jump Wire

First, apply some UV mask and cure it with a UV lamp for isolation

huawei mate x2 seawater damage repair apply uv for isolation

Secondly, there’s no inner layers structure for this model on the bitmaps yet. So we should scratch off the layers on the same motherboard for reference to avoid wrong jump wire connections.

huawei mate x2 seawater damage repair the same motherboard for reference

In the third step, let’s refer to the good motherboard to jump wires

huawei mate x2 seawater damage repair jump wires layer by

After jumping wires, apply some UV mask for isolation and strengthen again.

Mate X2 Seawater Damage

Assemble and Test

When the motherboard cooling down and the UV mask is isolated, let’s assemble the phone to have a test.

huawei mate x2 seawater damage repair assemble the phone to test

The phone can start up

huawei mate x2 seawater damage repair can start up

But there are still some other issues when entering into the system

  1. the display is abnormal on the main screen, the font display wider and fatter than normal
  2. the outside vice screen displays the HUAWEI logo only, and cannot enter into the standby user interface

huawei mate x2 seawater damage repair fatter and wider display

huawei mate x2 seawater damage repair the outter screen abnormal display

For the two issues, let’s continue to introduce the repair method in the next article.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top