Samsung A10 30mA Leckstrom kann nicht booten

Samsung A10 30mA Leckstrom kann nicht booten

Defective Model: SAMSUNG A10

Released 2019, March 19

Version: SM-A105F

 

 

Defekt-Phänomen

Samsung Galaxy A10 Cannot Boot, press the power button no response, and with 30mA current leakage when connected with DC power supply.

 

 

Fehlersuche

Press start-up button no response, normally is caused by below possible reasons:

1. Charging IC get damaged

2. The public voltage like V_BATTERY with problem

3. No voltage on the POWER_KEY rail

samsung a10 30ma current leakage cannot boot 2

 samsung a10 30ma current leakage cannot boot 3

Reparatur-Prozess

Based on repair experience,first just replace a new charging IC directly, the issue still unresolved.

samsung a10 30ma current leakage cannot boot 4

 

Then connect the DC power supply with public voltage V_BATTERY, find 450mA current leakage.

Use the rosin inspection method, find the out the rosin on the RF chip get melted

 samsung a10 30ma current leakage cannot boot 5


Get it replaced with a new one.

 

Repair Test

Assemble the phone and test, can be booted normally.

The issue get resolved.

Undroid Telefonreparaturkurs

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Nach oben scrollen