iPhone 7 Not Turn On with A Large Current

iPhone 7 Not Turn On with A Large Current

Phénomène de dysfonctionnement

Try to press the power button to power on the phone, but the iPhone 7 Not Turn On with A Large Current.

Dépannage

We checked the motherboard, there was no trace of deformation or water damaged.

Then connect the motherboard with the DC power supply, the current jumped to around 1.2A, which is very large.

iPhone 7 Not Turn On with A Large Current

Because the current is very large, some components should get very hot.

Connected the motherboard with the DC power supply and use the finger to touch the motherboard/ or use the thermal camera to locate the heated area, components around connector J3801 were found to be very hot, then use rosin inspection method to locate the exactly hot component. 

The rosin on one capacitor C3828 gets melted immediately.

iPhone 7 Not Turn On with A Large Current

Then measure the diode value on the capacitor, the value was 0, which means the capacitor is shorted.

Remove the capacitor and test again, the short has gone, and current back to normal, the phone also can be turned on.

Cours de réparation de la carte mère de l'iPhone 7

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Défiler vers le haut