iPhone 7 Plus 3D Touch Not Working

iPhone 7 Plus 3D Touch Not Working

Fenomeno di malfunzionamento

The phone can be turned on and the touchscreen can work, but the 3D touch does not work at all.

.

iPhone 7 Plus 3D Touch Not Working

Risoluzione dei problemi

Per il iPhone 7 Plus 3D Touch Not Working issue. Disassemble the phone and check the motherboard, especially the area around the 3D touch connector J3801.

We found the capacitor C3828 and the relevant pads on the PCB were lost. This capacitor is a filtering capacitor on the PP_VDD_BOOST line to the LDO chip U3801.

.

iPhone 7 Plus 3D Touch Not Working

iphone plus 3d touch not working 3mqi7

Continua to check the diode value on the capacitor C3724, the value was 379.

Then we continue to the connection pad of U3701, the value was 521, the two pads were connected, the diode value should be the same.

So we can conclude that the rail between C3724 and Pad 4 of U3801 was open.

.

iphone plus 3d touch not working qle2r   iphone plus 3d touch not working qqw6z

Jump a wire from C3724 to the pad of U3801 and tested again, the diode value was back to the same as the value on C3724, and the 3D function was also back to normal, problem resolved.

.

iphone plus 3d touch not working 6ayu9 iphone plus 3d touch not working lbcff  iphone plus 3d touch not working ups1r

iphone plus 3d touch not working

Corso di riparazione della scheda madre dell'iPhone 7

Lascia un commento

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

Torna in alto