Wie repariert man ein iPhone 13, das sich nicht einschaltet?

Wie repariert man ein iPhone 13, das sich nicht einschaltet?

iPhone 13 does not turn on repair

Defekt-Phänomen

Water-damaged iPhone 13 won’t turn on.

Prozess der Fehlersuche

First, disassemble the phone and check the motherboard, there is an obvious water damage sign on the motherboard.

how fix iphone 13 does not turn motherboard

Then connect the motherboard with a DC power supply, and use the tweezers to trigger and boot. There is a current leakage and the board cannot be booted.

how fix iphone 13 does not turn boot to check the current leakage

So there must be something wrong with the motherboard, we need to put the motherboard on the heating platform and separate it.

Heating parameter setting

how fix iphone 13 does not turn motherboard separating

After separating, let’s check the cosmetic of the motherboard under the microscope. There are some corrosive found.

how fix iphone 13 does not turn motherboard corrosive

how fix iphone 13 does not turn corrosive bitmap

Then connect the motherboard with the DC power supply machine and check under the thermal image camera, as we can see there is a small component gets extremely hot.

how fix iphone 13 does not turn thermal camera

Reparatur-Prozess

First, let’s deal with the corrosive part

Remove the corrosive chip with the hot air gun, solder paste, and tweezers

how fix iphone 13 does not turn corrosive chip

how fix iphone 13 does not turn corrosive chip ii

Then remove the short capacitor directly

(for the filter type capacitor, we can just remove it directly to avoid the possible damage to the PCB and surrounding components. If your soldering handwork is good enough, then you can also solder back a new one with the same specification)

how fix iphone 13 does not turn the shorted capacitor ip13

After that, reball the chips and solder them back to the motherboard

The detailed soldering process refers REWA Academy handwork course

how fix iphone 13 does not turn solder back the chips

After soldering, clean the motherboard thoroughly with PCB cleaner, wiper clothes, and brush.

Then trigger with the DC power supply machine to test the booting process

how fix iphone 13 does not turn the boot current is normal

Then boot current curve is normal, and the phone can be booted normally.

In the last step, let’s solder back the two layers of the motherboard and test the functions.

You can refer to iPhone 13 Pro Motherboard Trennung to view the detailed motherboard separation and bonding process.

iPhone 13 does Not Turn On

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Nach oben scrollen