Mold Version Manual OCA Film Laminator

Mold Version Manual OCA Film Laminator

mold version manual oca film laminator type

At present, a new type of Mold Version Manual OCA / POL Film Laminator Machine is available now. This machine is suitable for the lamination of OCA glue and POL. Working with a small vacuum pump, this machine features good stability.

Hier sind die wichtigsten Spezifikationen:

Screen Size: suitable for screen size less than 5.7″

N.W.: 12KG

G.W.: 20KG

Dimension: 30x35x30cm

Working Environment: 20-30℃, Dust-free Room

Sowie die Arbeitsschritte:

1. Install the right series mold and connect to vacuum pump
2. Plug in
3. Slip the roller to the left
4. Place the LCD to the mold on the platform below
5. Place the corresponding series OCA to the mold on the up platform
6. Click the button to suck
7. Tear the protector of OCA slowly
8. Turn the up platform and slip the roller to the right, finished Welcome to watch the operation steps through our YouTube Channel:

Für weitere Handy-Reparatur-Werkzeuge und LCD/Blenden-Trennmaschine, gehen Sie bitte zu  shop.rewa.tech  to get. Any questions and suggestions please contact us  service@rewa.tech .

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Nach oben scrollen