Réparation du HUAWEI Mate 40 Pro endommagé par une chute

Réparation du HUAWEI Mate 40 Pro endommagé par une chute

Received a serious drop damaged HUAWEI Mate 40 Pro

drop damaged huawei mate 40 pro repair 2

Modèle : Mate 40 Pro

Annoncé : 2020, 22 octobre

Phénomène de défaut

Because of the quarrel, the wife smashes the mobile phone in anger, felt regret after calming down, then sends the phone to our repair shop and wishes the phone can be fixed. 

  • Both the front screen and back cover are cracked
  • The phone cannot be booted

drop damaged huawei mate 40 pro repair the cracked phone

Dépannage

Remove the back cover and protect the cameras with the sticker

drop damaged huawei mate 40 pro repair remove the back cover and protect

Then take out the motherboard and check the cosmetic carefully, find the motherboard was deformed

drop damaged huawei mate 40 pro repair the motherboard has get deformed

Even the shielding cover can be taken off easily.

drop damaged huawei mate 40 pro repair even the shielding cover can be

A lot of inductors around the chip are loose and dropped

drop damaged huawei mate 40 pro repair lot of inductors around the chip

Remove the inductors directly and also check carefully to see if there are still other poor soldering components and chips. After checking, then try to boot with the DC power supply connected.

Luckily, there is no current leakage. This means there is a higher chance to get the phone fixed.

drop damaged huawei mate 40 pro repair there is no large current leakage

Then let’s check the conditions of the CPU and the UFS chip, remove the thermal grease, and clean with PCB cleaner, the CPU and UFS chip looks fine.

drop damaged huawei mate 40 pro repair looks fine

So, let’s put back the inductors one by one. Then check the boot current again.

drop damaged huawei mate 40 pro repair lets put back the inductors one

The phone still cannot be booted.

Carefully check with the thermal camera, and multimeter and finally find out there is an inductor is damaged.

drop damaged huawei mate 40 pro repair multimeter and thermal imager

drop damaged huawei mate 40 pro repair this inductor is

Replace the below inductor with a new one then test again, and the boot current is back to normal.

Temporarily assemble the phone and trigger the boot process, boot current curve is normal, and can feel the vibration of the phone. But no display…

Based on the repair experience, the no display should be caused by the poor soldering of the two layers of the motherboard. Measure the diode value on the display and touch connector, it’s higher than normal value

drop damaged huawei mate 40 pro repair measure the diode value on

Recombine the two layers of the motherboard and test again, the phone can be booted normally and the display function is also back to normal

drop damaged huawei mate 40 pro repair recombine

Drop Damaged HUAWEI Mate 40 Pro

Résumé

The issue was fixed by

  1. solder back the missing and loosen inductors
  2. replace another damaged inductor (we find it with the help of the multimeter and thermal imager)
  3. recombine the two layers of the motherboard

No matter what happened, try your best to control your temper and don’t be angry. If you cannot help to get angry at least don’t smash your phone. 

>>> Rejoindre Académie REWA pour mettre en lumière vos compétences en matière de réparation !

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Défiler vers le haut