Repair Drop-Damaged iPhone 13 Pro No Display Issue Solutions

Repair Drop-Damaged iPhone 13 Pro No Display Issue Solutions

In September 2021, Apple released iPhone 13 Pro and received a lot of praise from the tech community.
Nevertheless, accidents happen, and even seemingly functional devices can be rendered unusable after getting damaged by a drop. If you’ve recently suffered a drop-damaged iPhone 13 Pro with a cracked back cover and a faulty screen, you’re not alone. Throughout this blog post, we’ll look at effective solutions for diagnosing and repairing your iPhone 13 Pro no display issue.

iPhone 13 Pro

Phone Details:

Model: iPhone 13 Pro

Announced: 2021, September 14

Defect Phenomenon

A second-hand, recycled iPhone 13 Pro came in for repair. The phone appears to have sustained drop damage, evidenced by the severely cracked back cover glass and a slightly deformed motherboard. Despite these issues, the phone’s boot current is normal, but there is no display on the screen.

Troubleshooting

1: Initial Checks

connect iphone 13 pro with dc power supply
  • Connect the motherboard to a DC power supply machine. The boot current appears normal, indicating that the phone is attempting to start up, but the screen remains blank.
  • Suspect that the screen might be damaged. Replace the screen with a new one to test, but the issue persists—there is still no display.
  • Conclude that the problem likely originates from the motherboard rather than the screen.

2: Identifying the Issue:

check iphone 13 pro with multimeter
  • Based on repair experience with the iPhone 13 Pro, a common issue causing a no-display condition is damage to a small capacitor on the 1.8V power supply rail.
  • Measure the diode value on the 1.8V voltage rail and confirm that there is indeed a short circuit.

Repair Process

1: Locating the Faulty Component:

soldering iphone 13 pro
apply rosin iphone 13 pro motherboard

To precisely locate the damaged component, use the rosin inspection method:

  • Apply rosin to the components.
  • Connect the motherboard to a DC power supply, gradually increasing the voltage.
  • Observe the rosin; it will melt on the surface of the shorted component.
iphone 13 pro motherboard
  • Identify the shorted capacitor near the NAND (with the CPU on the back side) and battery connector.

2: Removing the Damaged Capacitor:

  • Carefully apply solder paste flux and use a hot air gun to remove the damaged capacitor from the motherboard.
  • Take extra care with the heating process to avoid damaging nearby components such as the NAND, CPU, or battery connector.

3: Replacing the Capacitor:

iPhone 13 Pro capacitor replacing
  • If skilled enough, solder back a new capacitor with the same specifications as the one removed.

Final Steps

Reassembly and Testing:

  • Reassemble the phone and trigger it to boot.
  • Confirm that the phone boots normally and that all functions are working correctly.

    Conclusion

    The no-display issue on the iPhone 13 Pro was successfully resolved by identifying and replacing a faulty filter-type capacitor on the 1.8V power supply rail. This repair restored full functionality to the device.

    Leave a Comment

    Your email address will not be published. Required fields are marked *

    Scroll to Top